BrakeTurnGo
Car Building Information => RSRT Product - Packing List & Instructions => Topic started by: Ron Sutton on Apr 14, 2026, 03:30 PM
If you click on any document below, it will open in Post Images.
Once you're in Post Images, you can ...
* Download the document from there.
* Zoom in by Clicking the Zoom button.
* Or, click on the document again, it will zoom to full size on your screen.
* Once the document is full size, you can print it from there as well, by pressing CTRL & P at the same time.
Please pay attention to the part #s in the upper right box of each form. They are different.
(https://i.postimg.cc/ryrLXy4S/2700-2X3-SLOTTED-LOWER-LINK-FRAME-BRKT-KIT-2X3.png) (https://postimg.cc/mhBn7s8D)
(https://i.postimg.cc/WbwCTd19/2703-C-LOWER-LINK-AXLE-COMBO-MOUNT.png) (https://postimg.cc/56jnmNvv)
(https://i.postimg.cc/qM4Dbpx7/2705-HDW-LOWER-LINK-MOUNT-HARDWARE-KIT.png) (https://postimg.cc/nMS1Mb58)
If your rear suspension will have coil-overs at more than a 12° angle ... AND/OR ... you're mounting our 7.5" GT Watt link with the lower tube mounting to the back of the Passenger Side Shock Mount ... you will want to add tubing braces from the rear axle housing to the mounts. See images below.
(https://i.postimg.cc/Hx7WhwHP/Rear-End-Diagrams-Lower-Link-Small-Brace.jpg) (https://postimg.cc/mzBGcFPQ)
(https://i.postimg.cc/15SRvVdV/Rear-End-Diagrams-Lower-Link-Super-Brace.jpg) (https://postimg.cc/HjSCxndT)